Author(s):
1. Dušan Šarac, Univeristy of Belgrade, Faculty of Mechanical Engineering, Serbia
2. Nenad Mitrovic, Mašinski fakultet Univerziteta u Beogradu, Serbia
3. Ivan Tanasić, Stomatoloski fakultet u Beogradu, Serbia
4. Miloš Milošević, Serbia
5. Žarko Mišković, Univeristy of Belgrade, Faculty of Mechanical Engineering, Serbia
6. Ljiljana Tihaček-Šojić, Stomatoloski fakultet u Beogradu, Serbia
7. Lidija Matija, Mašinski fakultet Univerziteta u Beogradu, Serbia

Abstract:
Influence of implant on the surrounding bone under loading, is considered to be one of the most important characteristics when determining success of surgical treatment. Two different dental implants are placed into the polymethyl-methacrylate bone block model, in vertical position. Measured surface was then sprayed with layer of white paint, and stochastic pattern of black dots was added afterwards. Implant surface and block were fully bonded along the entire interface. Axial force was applied on dental implant with universal testing machine Tinius Olsen, up to 500 N. Deformations on the outer surface of the PMMA block were recorded using digital image correlation method (GOM). Displacements from the surface of the PMMA bone block models of different implants are analyzed and discussed.

Key words:
Implant,Deformation,Bone,Dental,DIC

Thematic field:
SYMPOSIUM B - Biomaterials and nanomedicine

Date of abstract submission:
14.06.2015.

Conference:
Contemporary Materials 2015 - Savremeni Materijali

Abstract